Korg Ci-9600 Owner's Manual page 80

"Delete Measure" page
"Initial Edit"
80
Here you can delete one or more measures.
"Track" cell: Specify the track(s) that will be affected. To delete measures
from all tracks, specify "All."
"Start" cell: Specify the first measure that will be deleted.
"End" cell: Specify the last measure that will be deleted.
"Delete" button: When you press the "Delete" button, the measures will be
deleted.
"Cancel" button: Return to the previous screen without executing.
If you delete measures from only one track, the measures that are moved forward will
MeMO
be the same time signature as the corresponding measures of the other tracks, as
shown in the above diagram. Measures whose number has changed as a result of the
deletion may be shortened or lengthened.
Here you can edit the initial settings and effect settings located at the beginning of the
song. These settings can be made for each track.
"Initial Edit 1/2" page
Here you can make effect settings, and specify the keyboard sound and octave.
"Reverb" cell:
"Reverb type" cell: Specify the reverb type.
"Chorus" cell:
"Chorus type" cell: Specify the type of the chorus or other effect.
"Upper 1, 2, Low": Specify the program and octave setting for each part.
"Initial Edit 2/2" page
Here you can edit Program, Pan, Volume, Reverb, and Chorus settings for each
track.
Press the radio button for the track that you wish to edit. Then press the appropriate
cell and use the dial or the [VALUE] switches to adjust the setting.
"Track" radio buttons:Press a radio button to select the track that you wish to edit.
"Program" cell:
"Pan" cell:
"Volume" cell:
"Reverb" cell:
"Chorus" cell:
Specify the depth of the reverb.
Specify the depth of the chorus or other effect.
Select the program that will be the initial setting.
Specify the initial panpot value.
Specify the initial volume value.
Specify the reverb depth.
Specify the depth of the chorus or other effect.