Changing The File Name - Korg Ci-9600 Owner's Manual

2
Press the "Save" button
The "Save Prog" page will appear.
The [...] in the lower left of the LCD screen will show the name of the file to be
saved.
MeMO If you wish to change the filename, press the "Rename" button and change the file-
name. (☞Changing the file name)
3
Insert a floppy disk
Insert a blank floppy disk into the floppy drive. If you are using a new floppy disk,
format it first. (☞p.85)
4
Press the "Save" button
When you press the "Save" button, the data will be saved to the floppy disk.
When saving is completed, the "Now saving" message will disappear, and you will
return to the main screen.
Never remove the floppy disk or turn off the power while data is being saved.
Changing the file name
If you wish to change the filename in the "Save Prog" page when saving a program
group file, press the "Rename" button and change the filename.
1
Access the "Rename" button in the "Save Prog" page
Press the "Rename" button, and the "Rename File" page will appear.
2
Select a character
Use the dial or the [VALUE] switches to select the first characters.
3
Finalize the first character
Press the "Set" button to finalize the first character.
4
Select the next character
Select characters as in steps 1 and 2 to assign the desired file name.
A file name of up to 8 characters can be assigned.
To make a correction
Use the "o," "k" button to move the cursor to the character that you wish to cor-
rect.
If you wish to delete the character, press the "Delete" button; the character at the
cursor location will be deleted. If you wish to insert a character, press the "Insert"
button; the selected character will be inserted at the cursor location.
5
Finalize the file name
When you input the complete file name, press the "Return" button to return to the
previous screen.
35