Applying Effects To A Sound; Adding Reverb To The Sound - Korg Ci-9600 Owner's Manual

3. Applying effects to a sound

Adding Reverb to the sound

1
2
3
4
26
Applying this effect to a selected sound will create the illusion that you are playing in
various acoustical spaces such as a concert hall. This is called Reverb.
Press the [REVERB] switch
The [REVERB] switch indicator will light, and reverb will be applied to the sound.
Select the reverb type
Press the "Type" cell, and use the dial or the [VALUE] switches to change the reverb
type.
List of reverb types
1 Pedal Simulat Simulates the natural resonance of a piano.
Pressing the pedal will strengthen the effect.
2 Hall Reverb that simulates the acoustics of a small concert hall
3 Ensemble Hall Reverb that simulates the acoustics of a large hall
4 Concert Hall Reverb with emphasized early reflections
5 Room Reverb that simulates the acoustics of a room
6 Large Room Reverb that simulates the acoustics of a large room
7 Live Stage Reverb that simulates a live performance
8 Wet Plate Deep plate reverb
9 Dry Plate Light plate reverb
10 Spring Reverb Simulation of a spring reverb unit
11 Early Ref 1 Reverb that simulates only the early reflections of the reverberation
12 Early Ref 2 Reverb in which the early reflections decay slowly
13 Early Ref 3 Reverb in which the early reflections progressively increase
Adjust the reverb depth
Press the "Balance" cell, and use the dial or the [VALUE] switches to adjust the set-
ting.
The selectable range is Dry (no effect), 01–99, Fx (maximum).
Return to the main screen
If the [DISPLAY HOLD] switch is on, press the [EXIT] switch to return to the main
screen.
To cancel Reverb
Press the [REVERB] switch to make the [REVERB] indicator turn off.