Muting A Part; Adjusting Various Settings For Each Part - Korg Ci-9600 Owner's Manual

Muting a part

You can mute (silence) each accompaniment part separately.
Parts 1–9, 11–16, and the Drum part can be muted.
1
Access the "Mixer 3/3" page
2
Select the
The check box will be highlighted, and that part will not sound.
To cancel muting
Press the check box once again to turn it off.

Adjusting various settings for each part

Here's how you can adjust the depth of reverb or of the effect (e.g., chorus), or panpot
for each part.
1
Press the [MIXER] switch
The switch indicator will light, and the "Mixer" page will appear.
2
Select the part for which you wish to make settings
Use the "o," "k" buttons to select the part whose setting you wish to change.
3
Select the item that you wish to change
Press one of the radio buttons to select the item that you wish to change.
The value will be displayed in the lower right cell.
Items that you can set
"Chorus": Specify the effect send level (depth) for each part, which will be used
"Reverb": Specify the reverb effect send level (depth) for each part, which will be
"Pan":
"Prog.":
"Vol.":
4
Modify the value
Use the dial or the [VALUE] switches to adjust the setting.
To set another item
Use the radio buttons to select the desired item as described in step 3.
To make settings for another part
Select the desired part as described in step 2.
^ (check box) of the part you wish to mute
when the [CHORUS etc.] switch is pressed.
used when the [REVERB] switch is pressed.
Specify the panning for each part.
Specify the sound program for each part.
Specify the volume level of each part. The range is 0–127.
59