Recording Mode - Pioneer DVR-433H-K Operating Instructions Manual

Copying and back-up
07
• Video Mode Compatible Editing – Edit points
cannot be set with absolute precision, but high-
speed copying to Video mode DVD will be possible.
• Frame Accurate Editing – Exact edit points are
preserved, but high-speed copying to Video mode
DVD will not be possible.
• For more information about these options, see
Editing accuracy on page 74
4 Select the command you want:
• Divide – Divide a chapter into two or more parts: Use
the playback controls ( , ,
point at which you want to divide the chapter, then
press ENTER.
You can keep dividing the chapter as many times as
you wish (up to 99 per title).
• Erase/Move – Erase or move chapters: Select the
chapter you want to erase/move and press ENTER.
Select whether you want to erase or move the
chapter.
Move command only: Select the destination for the
chapter, and press ENTER.
• Combine – Combine two adjacent chapters into one:
Highlight the bar divider between two adjacent
chapters and press ENTER.
5 Select 'Exit' to get back to the main Copy List
screen.
Note
1.When copying to a Video mode DVD, the chapter markers in the copy may not be in exactly the same position as the original.
2.When the copy mode is set to something other than High-Speed Copy for copying to a Video mode DVD, the chapter markers of the original
are not copied. Chapter markers are put into the copy at regular intervals, according to the Auto Chapter setting (see also Auto Chapter (Video)
on page 97).
3.XP+ mode available only when copying to HDD.
4.Optimized mode only available when copying to DVD.
70
En
, , etc.) to find the
Edit Chapter (HDD Copy)
18:00 Mon 29/11 Pr 1 XP
Rec. time 1h00m
Chapters 10
1–1 0.00.00
Play
Exit
Divide
Erase/Move
Combine
Edit Chapter (HDD Copy)
19:00 Mon 29/11 Pr 2 SP
Erase
Move
Rec. time 1h00m
Chapter 0h01m
Cancel
001 002 003 004 005
Exit
Divide
Erase/Move
Combine
Edit Chapter (HDD Copy)
19:00 Mon 29/11 Pr 2 SP
1h00m
Rec. time
001 002 003 004 005
Exit
Divide
Erase/Move
Combine
Erase/Move
Set Thumbnail
You can change the thumbnail picture that appears in
the four-title display of the Disc Navigator for a title to any
frame that appears in that title.
1 Highlight the title you want to change the
thumbnail picture for.
2 Select 'Set Thumbnail' from the command menu
panel.
The thumbnail setting screen appears from which you
can find the frame you want.
3 Use the playback controls ( , ,
find a suitable frame, then press ENTER to set.
You can also use the CM SKIP (SHIFT +
Set Thumbnail (HDD Copy)
OK
Exit
4 Select 'Exit' to return to the Copy List screen.

Recording Mode

1 Select 'Recording Mode' from the command
menu panel.
2 Use the buttons to select a recording mode
for the copy.
1
• High-Speed Copy – The Copy List is copied at the
same recording quality as the original.
• XP, SP, LP, EP, SLP, SEP, MN
copied at the specified recording quality in real-time.
(Note that if you copy at a higher quality setting than
the original, the copy will not be better quality than
the original.)
If you select MN above, you can also change the level
setting (MN1–MN32, LPCM or XP+
Recording Quality box that appears.
2,4
• Optimized
– The recording quality is automatically
adjusted so that the Copy List fits on to the space
available on the disc. Copying is carried out in real-
time.
, , etc.) to
) buttons.
19:00 Mon 29/11 Pr 2 SP
Rec. time 0h01m
5-1 00.00.09.15
Play Pause
2
– The Copy List is
3
) from the