Pioneer DVR-433H-K Operating Instructions Manual page 95

The Initial Setup menu
Setting Options
Bilingual Recording A/L •
B/R
When recording bilingual audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format set to Video Mode Off (except
in LPCM mode), both audio channels are recorded and you can switch to the one you want on playback.
DV Input Stereo 1 •
Stereo 2
Mix
Input Level (L1–L3) -6dB – +6dB
(default: 0 dB)
Audio Out Settings
Digital Out On •
Off
When set to Off, all the following Audio Out settings are grayed out.
Dolby Digital Out Dolby Digital •
Dolby Digital
DTS Out On •
Off
96 kHz PCM Out 96 kHz
96 kHz
MPEG Out MPEG
MPEG
Explanation
Record the left (A) channel of a bilingual source when recording to
HDD with HDD Recording Format set to Video Mode ON, to DVD in
Video mode or in LPCM mode, from an external source.
As above, but for right (B) channel recording.
Select to use the 'live' audio track (recorded during the video shoot)
from a camcorder that supports two stereo audio tracks.
Select to use the overdubbed audio track from a camcorder that sup-
ports two stereo audio tracks.
Select one of the three settings to use a mix of the two stereo audio
tracks.
Adjust the input level separately for each of the external inputs from
–6dB to +6dB in steps of 3dB.
Activates the digital audio output.
Deactivates the digital audio output.
Output a Dolby Digital signal when a Dolby Digital source is being
played.
PCM Convert Dolby Digital sources to Linear PCM output. Use if your con-
nected equipment doesn't have a Dolby Digital decoder.
Output a DTS signal when a DTS source is being played.
Switch off the digital output when a DTS source is being played. Use
when your connected equipment doesn't have a DTS decoder. In this
case, use the analog audio outputs.
48 kHz • Convert 96 kHz digital audio sources to 48 kHz output. Use if your con-
nected equipment doesn't support 96 kHz sampling rate.
Output 96 kHz digital audio when a 96 kHz source is being played.
Output an MPEG audio signal when a source using MPEG audio is
being played.
PCM • Convert sources with MPEG audio to Linear PCM output. Use if your
connected equipment doesn't have an MPEG audio decoder.
13
95
En