Easy Connections - Pioneer DVR-433H-K Operating Instructions Manual

Connecting up
02

Easy connections

The setup described below is a basic setup that allows you to watch and record TV programs, and play discs. Other
types of connections are explained starting on the following page.
Important
• These connections use SCART cables (not supplied). If your TV (or VCR) does not have a SCART connection, see
the following page for connecting up using the supplied audio/video cable.
• The AV1(RGB)-TV AV connector can output ordinary (composite), S-video or RGB video, plus stereo analog audio.
The AV2/AUTO START REC(INPUT 1/DECODER) connector accepts ordinary, S-video and RGB video input, as
well as stereo analog audio. See AV1 Out on page 94 and AV2/L1 In on page 94 for how to set them up.
• Before making or changing any rear panel connections, make sure that all components are switched off and
unplugged from the wall outlet.
SCART AV
CONNECTOR
TV
AC IN
VCR
14
En
ANTENNA
IN
3
4
COMPONENT VIDEO OUT
Y P B
IN
AV 2/AUTO START REC (INPUT 1/DECODER) AV 1 (RGB) – TV ANTENNA
R L R L
CONTROL DIGITAL
OUT
OPTICAL
P
IN R
AUDIO VIDEO AUDIO VIDEO
S-VIDEO S-VIDEO
INPUT 3 OUTPUT
ANTENNA
IN (RF IN)
5
2
SCART AV
CONNECTOR
ANTENNA
OUT
ANTENNA
IN
1
Antenna/cable TV
wall outlet
1 Connect the cable from the antenna/cable TV
outlet to the antenna input on your VCR.
• If you are not connecting a VCR in the chain, connect
it to the ANTENNA IN (RF IN) jack on this recorder
and skip the next step.
2 Use an RF antenna cable (one is supplied) to
connect the antenna output of your VCR to the
ANTENNA IN (RF IN) of this recorder.
ANTENNA
OUT
3 Use another RF antenna cable to connect the
ANTENNA OUT of this recorder to the antenna input
OUT
on your TV.
4 Use a SCART cable (not supplied) to connect the
AV1(RGB)-TV AV connector on this recorder to the
SCART AV connector on your TV.
5 Use another SCART cable to connect the AV2/
AUTO START REC(INPUT 1/DECODER) AV connector
to a SCART AV connector on your VCR.
Tip
• This recorder has a 'through' function which allows
you to record a TV program from the built-in TV tuner
in this recorder while watching a video playing on
your VCR. (To use this feature when the recorder is in
standby, Power Save must be set to Off—see Power
Save on page 92).