Pioneer DVR-433H-K Operating Instructions Manual page 72

Copying and back-up
07
6 Select 'Start' to start writing the backed-up data
to the blank disc.
Disc Back-up
Write back-up data from Hard Disk Drive.
The disc contents will be overwritten.
OK to start?
• To see the progress of the back-up, press DISPLAY
(SHIFT + HELP).
• You can cancel the back-up process by pressing ONE
TOUCH COPY for more than one second. However,
this will make the disc unusable (although if you are
using a DVD-RW disc you can re-initialize it in order
to make it usable again—see Initializing a recordable
DVD disc on page 52.)
7 After the recorder has finished recording the
back-up disc, you can select whether to make
another back-up of the same data or exit.
Disc Back-up
Disc back-up finished.
To make another back-up copy, please load
a recordable disc.
• Select Start to make another back-up copy or Cancel
to finish. If you want to make another back-up copy,
return to step 6 above.
8 If you don't need to keep the back-up data on
the HDD, you can delete it now.
Select Yes to delete the data from the HDD; select No to
keep it (you can delete it later if you want to).
Disc Back-up
The backed-up data is still on the HDD.
Erasing it will increase the free space
available. OK to Erase?
• If you decide to leave the back-up data on the HDD,
you can make back-up copies to recordable DVD
discs anytime from the Disc Back-up menu.
72
En
Start Cancel
Cancel
Start
Yes No