Getting Started; Switching On And Setting Up - Pioneer DVR-433H-K Operating Instructions Manual

Getting started

Chapter 4
Getting started

Switching on and setting up

When you switch the recorder on for the first time, you
can make several basic settings using the Setup
Navigator feature. This takes you through setting the
clock, the internal TV tuner and the video output settings.
If you're using the recorder for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the recorder.
STANDBY/ON
DISPLAY TV/DVD
HELP INPUT SELECT
AUDIO SUBTITLE ANGLE
DISC NAVIGATOR
TOP
MENU
ENTER
HOME
MENU
1 Switch on your TV and set the video input to this
recorder.
2 Press the STANDBY/ON button on the remote
control or the front panel to switch on.
When you switch on for the first time, your TV should
display the Setup Navigator screen. (If the Setup
Navigator doesn't appear, you can also access it from the
Initial Setup menu; see page 92).
• If this recorder is connected to a compatible TV using
a fully-wired 21-pin SCART cable, the recorder will
take a few seconds to download country, TV screen
size and language information. (Check the manual
that came with your TV for compatibility information.)
HDD/DVD
CLEAR
CHANNEL
S V
HOW IEW
MENU
RETURN
3 Use the buttons to choose a language, then
press ENTER.
Initial Setup
Basic Basic Clock Setting Language
Tuner Input Line System
Video In/Out Power Save
Audio In Help
Audio Out Setup Navigator Setup Navigator
Language
Recording
Playback
4 Press ENTER to start setting up using the Setup
Navigator.
Initial Setup
Basic Clock Setting
Basic
Complete this setup before you
Tuner Input Line System
start using your recorder.
Video In/Out Power Save
Audio In Help
Audio Out Setup Navigator Setup Navigator
Language
Please use the Initial Setup if you
Recording want to make more detailed settings.
Playback
• If you don't want to use the Setup Navigator, press
to select Cancel, then press ENTER to exit the Setup
Navigator.
5 Select the Auto Channel Setting ('Auto Scan' or
'Download from TV'), or 'Do not set', then press
ENTER.
Initial Setup
Basic Clock Setting Auto Channel Setting
Basic
Tuner Input Line System
Video In/Out Power Save
Audio In Help
Audio Out Setup Navigator Setup Navigator
Language
Recording
Playback
• Select Do not set if you want to skip setting up the
channels (because they have already been set up, for
example).
• You can only use the Download from TV feature if
you connected this recorder to your TV using a
fully-wired 21-pin SCART cable connected to the
AV1(RGB)-TV connector, and if your TV supports this
function (check your TV's instruction manual for
more details).
français
English
Italiano
Deutsch
Español Nederlands
Svenska Pycc
K N N
Start
Start
Cancel
Auto Scan English
Download from TV
Do not Set
04
25
En