Simultaneous Recording And Playback; Recording From An External Component - Pioneer DVR-433H-K Operating Instructions Manual

Pioneer dvd recorder operating instructions dvr-433h-s dvr-433h-k
Hide thumbs Also See for DVR-433H-K:
Table of Contents

Advertisement

Recording
05
Simultaneous recording and
playback
VR mode
HDD
A feature called Chase Play makes it possible to watch a
recording in progress (DVD or HDD) from the start of the
recording (as in, playback is 'chasing' the recording). For
example, perhaps you have to miss the first 30 minutes of
a movie on TV; you can start recording, then start
watching the movie, from the beginning, while the
recorder is still recording 30 minutes ahead of you.
In fact, you're not just limited to watching the recording
in progress; you can watch anything else already on the
DVD or HDD by selecting it from the Disc Navigator
screen (see Using the Disc Navigator with recordable
discs and the HDD on page 54).
Important
• Note that you must use a DVD-RW Ver. 1.1 / 2x or
Ver. 1.2 disc to be able to use this feature.
• You may not be able to use this feature with a
DVD-RW disc that was first initialized on another
recorder.
• Chase playback is not possible using a VR mode
DVD-R disc.
During recording, press
the beginning of the current recording
DISC NAVIGATOR and select another title to play
from there.
You can use all the usual playback controls, such as
pause, slow-motion play, scan
• To stop playback, press
• To stop recording, press
continue).
• During recording or in timer recording standby, you
can't play an HDD title, DVD or Video CD/Super VCD
disc if the Input Line System setting doesn't match
the TV line system of the disc/HDD title (see also
Additional information about the TV system settings
on page 99). Also, during simultaneous recording
and playback, if the TV line system of the playback
track/title changes then playback will automatically
stop.
Note
1.You can't start playback immediately after recording starts. Simultaneous playback and recording doesn't work while copying or backing up.
2.When scanning a DVD, no sound is output if the recorder is also recording the DVD (see Scanning discs on page 56).
3.This cannot be selected if AV2/L1 In is set to Decoder (see AV2/L1 In on page 94).
48
En
to start playback from
1
, or press
2
and skip.
(recording will continue).
STOP REC (playback will
Recording from an external
component
VR mode
Video mode
HDD
You can record from an external component, such as a
camcorder or VCR, connected to one of the recorder's
external inputs.
STANDBY/ON
DISPLAY
TV/DVD
HELP
INPUT SELECT
AUDIO
SUBTITLE ANGLE
DISC NAVIGATOR
TOP
MENU
ENTER
HOME
MENU
REC MODE
ONE TOUCH
SHIFT
COPY
DVD RECORDER
1
Make sure that the component you want to
record from is connected properly to the DVD
recorder.
See Chapter 2 (Connecting up) for connection options.
2
Press INPUT SELECT repeatedly to select one of
the external inputs to record from.
There are three analog inputs and a DV digital input. The
current input is shown on-screen and in the front panel
display:
3
• AV2/L1 – Input 1
• L2 – Input 2 (front panel)
• L3 – Input 3
• DV – DV input (front panel)
HDD/DVD
CLEAR
CHANNEL
S
V
HOW
IEW
MENU
RETURN
BACK CM
SKIP
ST0P REC
REC
TV DRECT REC

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvr-433h-s

Table of Contents