Pioneer DVR-433H-K Operating Instructions Manual page 77

Editing
3 Use the playback controls ( , ,
find a suitable frame, then press ENTER to set.
Set Thumbnail (HDD)
OK
OK
Exit
Exit
You can also use the CM SKIP (SHIFT +
4 Select 'Exit' to return to the Edit screen.
Erase Section
HDD VR mode
Using this command you can delete a part of a title, ideal
for cutting out the commercial breaks in a recording
made from the TV.
1 Highlight the title containing the section you
want to erase.
2 Select 'Edit' > 'Erase Section' from the command
menu panel.
3 HDD only: Select the type of edit.
!
Please select the type of editing.
Video Mode Compatible Editing is
recommended for compatibility with
high-speed copying.
Video Mode Compatible Editing
Frame Accurate Editing
• Video Mode Compatible Editing – Edit points
cannot be set with absolute precision, but high-
speed copying to Video mode DVD will be possible.
• Frame Accurate Editing – Exact edit points are
preserved, but high-speed copying to Video mode
DVD will not be possible.
• For more information about these options, see
Editing accuracy on page 74
, , etc.) to
19:00 Mon 29/11 Pr 2 SP
0h01m
Rec. time
5-1 00.00.09.15
Play Pause
) buttons.
DVD RECORDER
4 Highlight 'From' then use the playback controls
( , , , , etc.) to find the start of the section
to erase, then press ENTER.
The bar at the bottom of the screen indicates the current
play position in the title. After pressing ENTER, a marker
shows the start of the section.
Erase Section (HDD)
From
To
Exit
5 Highlight 'To' then, in the same way, find the
end of the section to erase, then press ENTER.
After pressing ENTER, another marker indicates the end
of the section, with the section itself marked in red.
6 Select 'Yes' to confirm, or 'No' to cancel, then
press ENTER.
In the thumbnail viewer you can see a few seconds of
video either side of the marked section to see how the
edit will look.
• When editing VR mode Original content, you may not
be able to erase very short sections (less than five
seconds).
Divide
Play List only
HDD VR mode
Use this command to divide a title into two. Note that
once divided, the two new HDD titles cannot be
recombined into one again.
1 Highlight the title you want to divide.
2 Select 'Edit' > 'Divide' from the command menu
panel.
3 HDD only: Select the type of edit.
!
Please select the type of editing.
Video Mode Compatible Editing is
recommended for compatibility with
high-speed copying.
Video Mode Compatible Editing
Frame Accurate Editing
• Video Mode Compatible Editing – Edit points
cannot be set with absolute precision, but high-
speed copying to Video mode DVD will be possible.
18:00 Mon 29/11 Pr 1 XP
Rec. time 0h01m
5-1 00.00.09.15
Play Pause
DVD RECORDER
08
77
En