Programming System - Pioneer DVR-433H-K Operating Instructions Manual

Recording
6 Press ENTER to set the end time.
7 Select 'Yes' to set the timer recording and exit, or
'No' to go back to the timer recording screen.
Timer recording using the VIDEO Plus+®

programming system

This system makes programming timer recordings very
simple. Most TV guides publish PlusCode programming
numbers with their program details. If you want to make
a timer recording of a program, you just input the
corresponding code. The date, start, stop and channel
settings are made automatically. All you have to do is tell
the recorder the recording mode, and whether it's a
once-only recording or a regular recording.
STANDBY/ON
DISPLAY TV/DVD
HELP INPUT SELECT
AUDIO SUBTITLE ANGLE
DISC NAVIGATOR
TOP
MENU
ENTER
HOME
MENU
REC MODE
ONE TOUCH
SHIFT COPY
DVD RECORDER
HDD/DVD
CLEAR
CHANNEL
VIDEO Plus+
MENU
RETURN
BACK CM SKIP
ST0P REC
REC
TV DRECT REC
1 Press 'VIDEO Plus+ (SHIFT + MENU)' to display
the VIDEO Plus+ program screen.
You can also access this screen from the Home Menu
(press HOME MENU, select Timer Recording, then
VIDEO Plus+).
PlusCode#
1
4
7
0
• Use the number buttons to enter the PlusCode
programming number. (To clear the last digit
entered, press CLEAR.)
• You can also use the
digits from the on-screen display.
2 After making the settings, select 'Enter' and
press ENTER.
The timer recording screen appears with the timer
program you just set.
3 Confirm that the settings are correct.
If the channel number isn't displayed, use the
buttons to highlight CH, then use the
the correct channel number.
• If the channel number is set, but incorrectly, set up
the guide channel (see Set VIDEO Plus+ CH on
page 93).
4 Select 'Store Program' to finish.
• Other options in the same menu panel allow you to
name the program, and change the recording
destination and/or recording mode.
2 3
5 6
8 9
Cancel
Clear Enter
buttons to select
buttons to set
05
43
En