Using Disc Back-Up - Pioneer DVR-433H-K Operating Instructions Manual

Copying and back-up
When you change the recording mode setting, you can
see how much disc space it will require. If this is more
than is available, it shows up in red and you won't be able
to start copying. In this case, either change the recording
quality, or press RETURN to go back to the Copy List
screen and erase one or more titles from the Copy List.
3 Press ENTER.
Bilingual
1 Select the title containing the audio you want to
change.
2 Select 'Bilingual' from the command menu panel.
3 Use the buttons to select a bilingual audio
option.
4 Press ENTER.

Using disc back-up

* See also Copyright on page 63.
This feature offers a simple way to make a back-up copy
of a finalized Video mode disc. The data is copied first to
1
the hard disk drive , then on to another recordable DVD
disc.
1 Press HOME MENU, select 'Copy', then 'Disc Back-
up'.
2 Select a back-up option.
Disc Back-up
Start new disc back-up
Resume writing date
Erase back-up date
There are three back-up options:
• Start new disc back-up – Start making a back-up of
a disc.
• Resume writing data – Record the back-up data
already on the HDD to a recordable DVD.
• Erase back-up data – Erase the back-up data on the
HDD.
Note
1.It is not possible to play this material directly from the HDD.
3 Press OPEN/CLOSE (front panel) to open the
disc tray and load the disc you want to make a back-
up of, then close the disc tray.
You can only make back-up copies of finalized Video
mode discs.
Disc Back-up
No Disc.
Please load a disc to be backed-up.
Start
4 Select 'Start'.
Disc Back-up
Read from disc and save to HDD.
Start reading?
Start
• To see the progress of the back-up, press DISPLAY
(SHIFT + HELP).
• You can cancel the back-up process by pressing ONE
TOUCH COPY for more than one second.
5 When the data has been copied, press
CLOSE (front panel) to open the disc tray. Take out
the disc and load a blank* recordable DVD.
* If you're using a DVD-RW, the disc doesn't have to be
blank, although the previous contents of the disc will be
erased in the back-up process.
Disc Back-up
Disc content saved to Hard Disk Drive.
Please eject the disc and load a
recordable disc
Start
You can use a DVD-R Ver. 2.0 or 2.1 disc, or DVD-RW Ver.
1.1 or Ver. 1.2 disc for the back-up.
• If you back-up a DVD-R disc to DVD-RW, you cannot
undo the finalization later.
• Actual recordable capacity of discs vary so there may
be cases where the contents of the disc you're
backing-up will not fit on to a particular blank disc. If
this happens, please try another brand of disc.
Cancel
Cancel
OPEN/
Cancel
07
71
En