Recording Mode - Pioneer DVR-54HX-S Operating Instructions And Owner's Manual

11 Copying and backup
ENTER
4 Add titles to the Copy List
(highlight a title and press ENTER to add).
Titles you've added to the Copy List are
highlighted in pink.
ENTER
5 Select 'Next' from the
command menu panel to proceed to the
title edit screen.
ENTER
6 Select a title to edit.
A menu appears of Copy List editing
commands:
• Erase – Erase individual titles from the
Copy List (see Erase on page 100).
• Move – Change the order of titles in the
Copy List (see Move on page 106).
• Preview – Check the content of a title in
the Copy List.
• Cancel – Exit the menu.
Repeat this step for as many titles you have
that need editing.
ENTER
7 Select 'Next' from the
command menu panel to proceed to the
copy options screen.
• Select Recording Mode if you want to
change the recording quality (see
Recording Mode on page 116).
ENTER
8 Select 'Start Copy' to start
copying.
Note
1 When copying to a Video mode DVD or DVD+R/+RW, the chapter markers in the copy may not be in exactly
the same position as the original.
2 When the copy mode is set to something other than High-Speed Copy for copying to a Video mode DVD or
DVD+R/+RW, the chapter markers of the original are not copied. Chapter markers are put into the copy at reg-
ular intervals, according to the Auto Chapter setting (see also Auto Chapter (Video)) and Auto Chapter (DVD+R/
+RW) on page 146.
116
3 When copying to a DVD+R/+RW, MN1 to MN3 and SEP modes are not available.
4 Optimized mode only available when copying to DVD.
En

Recording Mode

ENTER
1 Select 'Recording Mode' from
the command menu panel.
ENTER
2 Select a recording mode for
the copy.
• High-Speed Copy
copied at the same recording quality as
the original.
• XP, SP, LP, EP, SLP, SEP, MN
List is copied at the specified recording
quality in real-time. (Note that if you copy
at a higher quality setting than the
original, the copy will not be better
quality than the original.)
If you select MN above, you can also
change the level setting (MN1 to MN32
or LPCM) from the Recording Quality box
that appears.
2,4
• Optimized
– The recording quality is
automatically adjusted so that the Copy
List fits on to the space available on the
disc. Copying is carried out in real-time.
When you change the recording mode
setting, you can see how much disc space it
will require. If this is more than is available,
it shows up in red and you won't be able to
start copying. In this case, either change the
recording quality, or press RETURN/EXIT to
go back to the Copy List screen and erase
one or more titles from the Copy List.
1
– The Copy List is
2
– The Copy
3