Ftp Software Download; Copy-Rfile - Cisco ONS 15454 Reference Manual

Chapter 2 Procedures and Provisioning
If PATH is STS, it will retrieve all the STS cross-connections based on the queried AIDs.
<AID>={FacilityAIDs, STSAIDs, VTAIDs, ALL}
Output format of the PCA STSp cross-connection retrieval command:
Example 2-28 "<FROM>,<TO>:2WAYPCA,STS3C"
Output format of the PCA VT cross-connection retrieval command:
Example 2-29 "<FROM>,<TO>:2WAYPCA"

2.6 FTP Software Download

FTP timeout is 30 seconds and is not user-configurable.
Note
The file transfer protocol (FTP) software download feature downloads a software package to the inactive
flash partition residing on either the TCC2/TCC2P, XTC, 15310-CL-CTX, or TSC card. FTP software
download provides for simplex and duplex TCC2/TCC2P, XTC, 15310-CL-CTX, or TSC card
downloads, success and failure status, and in-progress status at 20% increments.

2.6.1 COPY-RFILE

The COPY-RFILE command downloads a new software package from the location specified by the FTP
URL into the inactive flash partition residing on either the TCC2/TCC2P, XTC,15310-CL-CTX or TSC
card. COPY-RFILE can also be used to backup and restore the database file.
Since Release 5.0, PACKAGE_PATH is relative to your home directory, instead of being an absolute path
Note
from the root directory of the NE. If you want to specify an absolute path, start the path with the string
'%2F'.
Input format:
Example 2-30 COPY-RFILE:[<TID>]:[<SRC>]:<CTAG>::TYPE=<XFERTYPE>,[SRC=<SRC1>,]
where:
•
•
•
[DEST=<DEST>,][OVWRT=<OVWRT>];
SRC is the type of file being transferred
<XFERTYPE> is the file transfer protocol
<SRC1> specifies the source of the file to be transferred. Only the FTP URL is supported. In a
nonfirewall environment the format for the URL is:
"FTP://FTTPUSER[:FTP_PASSWORD]]@FTP_HOST_IP[:FTP_PORT]
/PACKAGE_PATH[:TYPE=I]"
where:
FTP_USER is the userid to connect to the computer with the package file
–
FTP_PASSWORD is the password used to connect to the computer with the package file
–
2.6 FTP Software Download
Cisco ONS SONET TL1 Command Guide, R6.0
2-43