Sample_Type; Startup_Type; Notes For Dwdm Card Types; Table 2-15 Tmper Type - Cisco ONS 15454 Reference Manual

Chapter 2 Procedures and Provisioning
Table 2-15
Values
1-HR
RAW-DATA

2.10.12.2 SAMPLE_TYPE

SAMPLE_TYPE
Table 2-16
Value
ABSOLUTE
DELTA

2.10.12.3 STARTUP_TYPE

STARTUP_TYPE
is crossing the rising or falling threshold.
Table 2-17
Value
RISING
FALLING
RISING-OR-LTING

2.10.13 Notes for DWDM Card Types

The PM for client port and/or chunk port (OCH) can include both the RMON-managed PM and the
SONET PM when the client payload is provisioned as
1GFC/2GFC/10GFC/1GFICON/2GFICON/GIGE/10GIGE for the following cards:
•
•
•
•
•
TMPER Type (continued)
Description
Performance Parameter Accumulation Interval Length - Every 1 Hours.
Only applicable to RMON stats.
24 history data are available.
The data shown is accumulated starting from the last time the counters are
cleared. This is only applicable to RMON managed PMs.
(Table 2-16) describes how the data will be calculated during the sampling period.
SAMPLE_TYPE
(Table 2-17) indicates whether an event will be generated when the first valid sample
STARTUP_TYPE
Description
Generate the event when the sample is greater than or equal to the rising
threshold.
Generate the event when the sample is smaller than or equal to the falling
threshold.
Generate the event when the sample is crossing the rising threshold, or it
is crossing the falling threshold.
MXP_2.5G_10G
TXP_MR_10G
TXP_MR_2.5G
TXP_MR_10E
MXP_MR_2.5G
2.10.13 Notes for DWDM Card Types
Description
Comparing directly
Comparing with the current value of the selected
variable subtracted by the last sample.
Cisco ONS SONET TL1 Command Guide, R6.0
2-67