2.4.11 Node 1 Configuration Example (Source Node)
Figure 2-47
command used to establish drop and continue connections.
Figure 2-47
Path Selector
2.4.11 Node 1 Configuration Example (Source Node)
Issue the command ENT-CRS-STSn::STS-1-1,STS-5-1&STS-6-1:CTAG::1WAY; command on Node 1.
Figure 2-48
5/1/1
Tx
Cisco ONS SONET TL1 Command Guide, R6.0
2-40
shows a circuit diagram example of the orientation of AIDs associated with the ENT-CRS
Orientation of AIDs Used to Establish Drop and Continue Connections
Path Selector
B
Path Selector
D
Path Selector
Bridge from 1/1/1 to 5/1/1 and 6/1/1
1/1/1
Rx
Bridge
6/1/1
Tx
A
Path Selector
Path Selector
C
Chapter 2
Procedures and Provisioning