Inup Errors; Table; Ipex Errors; Ipms Errors - Cisco ONS 15454 Reference Manual

3.1 Errors

Table 3-16

INUP Error Messages
EXTRNG Configuration Is Not Supported
General Block Unsupported
Missing mandatory field
NODEID Configuration Is Not Supported
RNGID Configuration Is Not Supported
RNGMAPAUTO Configuration Is Not Supported
RNGWTR Configuration Is Not Supported
Table 3-17
IPEX Error Messages
Duplicate N/V field
Invalid Payload Block. Extra Parameters
Invalid Payload Block. Extra Parameters
Table 3-18
IPMS Error Messages
Invalid AID Block. Missing Mandatory Field
Invalid Payload Block. Missing Mandatory Field
Invalid syntax
Missing mandatory field
Table 3-19
IPNC Error Messages
Cannot Change Existing Protection Type
Cross-connect Doesn't Have Path Protection Path Selector
Description Too Long
Expected Duplex Not Supported
Expected Speed Not Supported
Invalid Auto Negotiate Value
Invalid Encapsulation Type
Invalid Flow Control Value
Invalid Maximum Frame Size
Invalid Parameter
Invalid Trans Value
Cisco ONS SONET TL1 Command Guide, R6.0
3-16

INUP Errors

IPEX Errors

IPMS Errors

IPNC Errors

Chapter 3 TL1 Errors