Elcometer PG70 Operating Instructions Manual page 8

Key Functions
a) Decreases values on the display (press and hold to change values quickly).
b) Switches the display backlight between three settings; on, off and auto.
c) Press and hold during gauge switch on to toggle LOC mode on/off
d Scrolls down through menu system
a) Press and hold during gauge switch on to toggle the audible beeper on or
off.
b) Press to toggle the alarm on or off, and to adjust the nominal thickness
value.
Press to toggle the DIFFERENTIAL mode on or off, and to adjust the nominal
thickness value.
MEM
Press to switch data logging (memory) on/off.
Press when data logger is switched on to clear the contents of an entire batch,
or an individual memory location.
CLR
The CLR key is also used to send an obstruct message (ObSt) to an individual
memory location. The ObSt symbol would indicate that the user was unable to
take a reading at a particular location.
6
For more Mode
information see
PG70
page 19. PG70
page 20. PG70
PG70
PG70DL
PG70
PG70
page 17.
PG70
page 16.
PG70DL
Measurement -
Recording your
PG70DL
readings - see
page 22.
Measurement -
Recording your
PG70DL
readings - see
page 22.