Elcometer PG70 Operating Instructions Manual page 6

A : Allows the user to set a target so that an audible and visual alarm operates when taking
LARM
measurements. If the measurement falls below a pre-set nominal (target) value a red LED will light and the
beeper sounds. A green LED will light to indicate an acceptable thickness.
D : Allows the user to send data direct to a printer or PC.
ATA OUTPUT
D - (PG70DL
ATA LOGGING
up to 10 batches each containing up to 100 readings. Batches may be transferred to a PC using supplied
software.
1.4 PACKAGING
Your gauge is packed in a cardboard and foam package. Please ensure that this packaging is disposed of
in an environmentally sensitive manner. Please consult your Local Environmental Authority for further
guidance.
4
): Memory capacity of up to 1000 readings. Readings are stored in
VERSION ONLY
Elcometer 207
Ultrasonic Thickness Gauge
DIFF
ALRM
ALRM DIFF
SCAN
CAL SEND
CAL SEND SCAN
IN ON
IN
MM OFF
MM
PRECISION GAUGE
R
PG70
Elcometer 207
Ultrasonic Thickness Gauge
ALRM DIFF
MODE MEM
CAL SEND SCAN
CAL SEND CLR
IN ON
IN
MM OFF
MM
PRECISION GAUGE
R
PG70DL