Table of Contents
Advertisement
1.1 STANDARDS
Your gauge can be used in accordance with the following Standards and test methods; ASTM E 797 and
EN 15317.
1.2 WHAT THIS BOX CONTAINS
Model PG70 or PG70DL Gauge, Bottle of couplant, Battery (2 x), Carrying case, Test certificate, Operating
instructions, CD with data transfer and data collection software (DL version only), RS232 cable and USB to
Serial converter.
Note : The box does not include a transducer; these must be ordered separately. To order a transducer,
contact Elcometer NDT or your local Elcometer NDT supplier.
To maximise the benefits of your new Elcometer NDT Ultrasonic Thickness Gauge, please take
some time to read these Operating Instructions. Do not hesitate to contact Elcometer NDT or your
Elcometer NDT supplier if you have any questions
1.3 FEATURES OF THE GAUGE
E
-
-
: Allows measurement of coated materials without having to remove the coating.
CHO
TO
ECHO MODE
I
-
-
NTERFACE
TO
ECHO MODE
materials and plastic.
P
: For measuring the thickness of plastics.
LAS MODE
S
: Identifies the minimum thickness over a large area while moving the transducer over the
CAN MODE
surface. While the transducer is in contact with the material being measured the smallest value is held in
memory and displayed when scanning is complete.
: The gauge switches to this mode automatically when measuring thicker
3
Advertisement
Table of Contents
