Elcometer PG70 Operating Instructions Manual page 2

This product meets the Electromagnetic Compatibility Directive.
The product is Class A, Group 1 ISM equipment according to CISPR 11. Group ISM product: A product in which
there is intentionally generated and/or used conductively coupled radio-frequency energy which is necessary for
the internal functioning of the equipment itself.
Class A product is suitable for use in all establishments other than domestic and those directly connected to a
low voltage power supply network which supplies buildings used for domestic purposes.
Note: In the close presence of some radio transmitters, erroneous readings may be given. If this occurs tests
should be repeated at another location.
These operating instructions are available for download on our website www.elcometerndt.com.
The following trademark is a registered trademark of Elcometer Limited, Edge Lane, Manchester, M43 6BU.
United Kingdom:
Material Safety Data Sheet for the ultrasonic couplant supplied with the PG70DL & PG70 and available as an
accessory, is available to download via our website:
Elcometer NDT Ultrasonic Couplant Material Safety Data Sheet :
www.elcometerndt.com/images/MSDS/elcometer_ultrasonic_couplant.pdf
All other trademarks acknowledged. © Elcometer Limited. 2011-2012. All rights reserved. No part of this
document may be reproduced, transmitted, transcribed, stored (in a retrieval system or otherwise) or translated
into any language, in any form or by any means (electronic, mechanical, magnetic, optical, manual or otherwise)
without the prior written permission of Elcometer Limited.
Doc.No. TMA-0499 Issue 02
Text with Cover No: 23226