Table of Contents
Advertisement
To set alarm value and switch alarm on
Model PG70
1. Press ALRM to toggle the status of the alarm.
When toggled on the gauge displays ALAr
followed by a thickness value.
2. Use UP and DOWN to adjust Lo alarm
thickness value.
3. Press SEND when correct value is displayed.
The Hi value will now be displayed.
4. Repeat steps 3 and 4 to adjust and set the Hi
alarm thickness value.
To switch alarm off
Repeat the steps above, but select ALAr OFF.
18
Model PG70DL
1. Select MENU/ALAr.
2. Press SEND to toggle the alarm on/off.
3. When toggled on use UP and DOWN to adjust
the Lo alarm.
4. Press SEND and adjust the Hi alarm.
5. Press SEND to confirm.
6. Press MODE to return to the measurement
screen.
Advertisement
Table of Contents
