Table of Contents
Advertisement
6.4 ALARM
The Alarm feature of your gauge allows you to set an audible and visual alarm when taking measurements.
If the alarm is switched on, the green light on the front panel of the gauge is illuminated. If the measurement
falls below the value set by the user, a red light shows on the front panel of the gauge and the beeper is
sounded (if it is switched on).
Use of the red light and beeper improves the speed and efficiency of the inspection process by eliminating
constant viewing of the reading displayed.
To switch beeper on/off
Model PG70
1. While the gauge is off, press and hold down
ALRM.
2. Switch on the gauge.
3. Release ALRM.
The gauge will display bEEP OFF or bEEP
On.
4. Repeat steps 1 to 3 to toggle between bEEP
ON and bEEP OFF.
Model PG70DL
1. Select MODE/bEEP.
2. Press SEND to toggle the status of the beeper
on/off.
3. Press MODE to return to measurement screen
17
Advertisement
Table of Contents
