Elcometer PG70 Operating Instructions Manual page 28

9.4 TRANSFERRING DATA
Model PG70
After taking a measurement, press SEND to send the measurement to the computer.
Model PG70 DL
TRANSFERRING ONE BATCH
1. Press MEM to activate the data logging functions and settings.
2. Press SEND to enter batch setup.
3. Use UP and DOWN to scroll to the required batch.
4. Press SEND to select the batch. The display will flash FILE F-05 (or the batch selected).
5. Use UP and DOWN to scroll to to the required batch.
6. Press SEND to send readings to the computer.
The display will show buSY during data transfer.
Wait until all the data has been transferred.
7. Press MEM to exit the data logging functions.
TRANSFERRING ALL BATCHES
1. Press MEM to activate the data logging functions and settings.
2. Use UP and DOWN to scroll to SEnd ALL flashing on the display.
3. Press SEND to send readings to the computer.
The display will show buSY during data transfer.
Wait until all the data has been transferred.
26