Non-Port Side Of The Brocade 5300; Brocade 5300 Management - Brocade Communications Systems 5300 Hardware Installation Manual

Non-port side of the Brocade 5300

9. Trunking port group 9; FC ports 64-71
10. Trunking port group 10; FC ports 72-79
Non-port side of the Brocade 5300
The following figure shows the non-port side of the Brocade 5300, which contains the power supplies (including the AC power
receptacle and AC power switch) and fans.
FIGURE 3 Non-port side of the Brocade 5300
1 Brocade 5300
2 Non-port side of switch
3 Power supply #2
4 Fan assembly #3

Brocade 5300 Management

You can use the management functions built into the Brocade 5300 to monitor the fabric topology, port status, physical status, and
other information to help you analyze switch performance and to accelerate system debugging.
The Brocade 5300 automatically performs power-on self-test (POST) each time it is turned on. Any errors are recorded in the system
error log. For more information about POST, see
For information about upgrading the version of Fabric OS installed on your switch, see the Brocade Fabric OS Administration Guide
You can manage the Brocade 5300 using any of the management options listed in the following table.
16
5 Fan assembly #2
6 Fan assembly #1
7 Power supply #1
POST and boot specifications on page 69.
Brocade 5300 Hardware Installation Guide
53-1000858-07