Answering Calls - Yealink T46G Skype For Business Edition User Manual

To place a call using the headset:
Do one of the following:
- With the optional headset connected, press
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press
- With the optional headset connected, press
Enter the desired number using the keypad.
Press
Note
To permanently use the headset mode, refer to
The T46G Skype for Business phone can handle multiple calls at a time. However, only one active
call (the call that has audio associated with it) can be in progress at any time.
To place multiple calls:
You can have more than one call on your T46G Skype for Business phone. To place a new call
during an active call, do one of the following:
- Press the line key. The active call is placed on hold.
Enter the desired number using the keypad.
Press
- Press
Press the NewCall soft key.
Enter the desired number using the keypad.
Press
You can press
retrieve the desired call.

Answering Calls

When you are not in another call, you can answer a call in three ways:
Using the handset

Using the speakerphone

, , or the Call soft key.
, , or the Call soft key.
, , or the Call soft key.
or the Hold soft key to place the original call on hold.
, , or the Call soft key.
or to switch between calls, and then press the Resume soft key to
to activate the headset mode.
to activate the headset mode.
Headset Prior on page 76.
Basic Call Features
99