Placing Calls - Yealink T46G Skype For Business Edition User Manual

User Guide for the T46G Skype for Business phone

Placing Calls

You can place a call in three ways using your T46G Skype for Business phone:
Using the handset

Using the speakerphone

Using the headset

You can also dial the number first, and then choose the way you want to speak to the other
party.
You can search for the contacts and then dial from the result list. For more information, refer to
Searching for Contacts
During a call, you can alternate between Speakerphone, Headset, and Handset modes by
pressing the Speakerphone key, the HEADSET key, or picking up the handset.
The call duration of the call, the talking mode and the avatar of the contact are visible on the
LCD screen. In the figure below, the call to "2227" has lasted 6 seconds.
To place a call using the handset:
Pick up the handset.
1.
Enter the desired number using the phone keypad.
2.
Press
3.
The # key is configured as a send key by default. You can also set the * key as the send key, or
set neither. For more information, refer to the
To place a call using the hands-free speakerphone mode:
Do one of the following:
With the handset on-hook, press
-
Enter the desired number using the keypad.
Press
With the handset on-hook, enter the desired number using the keypad.
-
Press
98
on page 71.
, , or the Call soft key.
, or the Call soft key.
, , or the Call soft key.
Key as Send on page 45.
or the line key to obtain a dial tone.