Page 1
ManIT Technology VoIP Handset User Guide Yealink T46 Series...
Page 2
VoIP Handset User Guide – Yealink T46 Series Understanding your phone and buttons Yealink T46G with optional EXP40 module displayed...
Page 3
VoIP Handset User Guide – Yealink T46 Series Phone Feature Description Handset Blunt instrument used to get your message across Displays information about calls, messages, soft keys, LCD Screen date, time and other relevant data (If enabled) may display phone is powered and or flash...
VoIP Handset User Guide – Yealink T46 Series Icon Information Icons appearing on the LCD screen are described in the following table: Icons Description Network is unavailable Registered successfully Register failed Registering Hands-free speakerphone mode Handset mode Headset mode Voicemail...
VoIP Handset User Guide – Yealink T46 Series LED Information Power Indicator LED: LED Status Description Solid Red The phone is initialising Fast flashing red (300ms) The phone is ringing Slowly flashing red (1s) The phone received a call The LCD screen’s backlight is off...
Page 6
VoIP Handset User Guide – Yealink T46 Series Call functions and general use Adjusting Volume: The default volume set in the phone may not be appropriate, to change do the following: Ringer: while phone is idle or ringing, press the volume up/down button to the desired volume.
Page 7
VoIP Handset User Guide – Yealink T46 Series Redial: Dial a previously dialled number 1. Press the Redial key to display the Redial List 2. Use the navigation up/down buttons to select the number you wish to dial 3. Once selected press the Redial key again to initiate a call.
Page 8
VoIP Handset User Guide – Yealink T46 Series Call Forward: Call Forwarding will divert all incoming calls to another number, while Call Forward is active the Call Forward icon will appear on the LCD screen NOTE: If the extension rings as part of a ring group, call forwarding must be configured to occur AFTER the ring group times out or they will be diverted as well.
Page 9
VoIP Handset User Guide – Yealink T46 Series Transfer a call: You can transfer a call to another party during a call in one of two ways: Blind Transfer: Transfer a call instantly to a 3 party Attended Transfer: Transfer a call after consulting the 3...
VoIP Handset User Guide – Yealink T46 Series Do Not Disturb: Do Not Disturb puts the phone in a constant “busy” state, this will redirect all incoming calls to voicemail. To active Do Not Disturb, press the DND soft key while the phone is idle.
VoIP Handset User Guide – Yealink T46 Series Voicemail Operations Voicemail, also known as a message bank are voice messages left by a caller when a phone is busy or not answered Leave a Voicemail Message If a destination is busy or unavailable you may be redirected to voicemail.
Page 12
VoIP Handset User Guide – Yealink T46 Series NOTES:...
Page 13
VoIP Handset User Guide – Yealink T46 Series NOTES:...
Page 14
VoIP Handset User Guide – Yealink T46 Series NOTES:...