Assigning Contacts To The Exp40 - Yealink T46G Skype For Business Edition User Manual

User Guide for the T46G Skype for Business phone
Page Keys
③

Assigning Contacts to the EXP40

Each EXP40 provides you with 20 EXP keys and 2 display pages, supporting a total of 40 lines
that you can set up as your contacts. You can connect up to 6 EXP40 to your phone to support a
maximum of 240 EXP keys per phone.
You can assign the desired group's contacts to be displayed on the EXP40. The contacts in the
selected group are assigned to EXP keys on your EXP40.
To assign contacts to the EXP40:
Press ->Basic->Exp Module.
1.
Press
2.
field.
X ranges from 1 to 6. The value of X depends on the sequence number of the connected
EXP40.
Null is selected by default, and it means that the EXP40 doesn't display contacts.
Press the Save soft key to accept the change or the Back soft key to cancel.
3.
The contacts in the selected group will be displayed on the expansion module.
EXP Module is configurable via web user interface at the path Settings->EXP Module.
If you connect more than one expansion module to a single phone, and a group A that has
more than 40 contacts is assigned to be displayed on the module1, you need to understand the
following tips:
If another group B is assigned to be displayed on the next module, the rest contacts of the

group1 will be ignored. The next module only displays contacts in group B.
If group A is also assigned to be displayed on the next module or no group is assigned to

be displayed on the next module, the rest contacts of the group A will be displayed on the
next module.
198
Item
Navigates between pages on the expansion module.
or , or the Switch soft key to select the desired group from the ModuleX
Description