Section - 6 - General Specifications & Operator; Introduction; Operating Specifications - JLG 600A Operation And Safety Manual

6.1

INTRODUCTION

This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual - Global Spec
(s/n 0300177361 to Present)....................................................3121616
Illustrated Parts Manual - Global Spec
(s/n 0300177361 to Present)....................................................3121617
3121615
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.2

OPERATING SPECIFICATIONS

Table 6-1. Operating Specifications
Maximum Work Load (Capacity) - ANSI
Unrestricted:
Restricted:
Maximum Work Load (Capacity) - CE &
Australia
Unrestricted:
Restricted:
Maximum Travel Grade (Gradeability)
2WD
4WD
Maximum Travel Grade (Side Slope)
Turning Radius - (outside)
2WS
4WS
Turning Radius -
(outside) narrow chassis
2WS
4WS
Turning Radius - (inside)
2WS
4WS
– JLG Lift –
500 lb (227 kg)
1000 lb (454 kg)
500 lb (230 kg)
1000 lb (450 kg)
30%
45%
5°
17 ft. 8 in. (5.38 m)
11 ft. 8 in. (3.56 m)
16 ft. 6 in. (5.03 m)
11 ft. 2 in. (3.4 m)
11 ft. 5 in. (3.48 m)
5 ft. 6 in. (1.68 m)
6-1