Tires; Hydraulic Oil - JLG 600A Operation And Safety Manual

Tires

Table 6-7. Tire Specifications
Size IN355/55D 625
Load Range
Ply Rating 14
Tire Pressure 90 PSI (6 Bar)
* Load Capacity - 11,700 lb. (5307 kg) - Static
Size
Load Range*
Ply Rating
Tire Pressure
* Load Capacity - 15,500 lb. (5443 kg) - Static
** Load Capacity - 11,800 lb. (4404 kg) - Static
3121615
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
IN355/55D 625 14 x 17.5
G G
14
Foam-Filled
41/18LLx22.5 36x12-20FA
G **
- - N/A
70 PSI (5 Bar) Solid-Boss

Hydraulic Oil

HYDRAULIC SYSTEM OPERATING
TEMPERATURE RANGE
*
+0° to +180° F (-18° C to +83° C)
N/A
+0° F to +210° F (-18° C to +99° C)
Air-Boss
+50° F to +210° F (+10° C to +210° C)
NOTE: Hydraulic oils must have anti-wear qualities at least to API Ser-
vice Classification GL-3, and sufficient chemical stability for
mobile hydraulic system service. JLG Industries recommends
Mobilfluid 424 hydraulic oil, which has an SAE viscosity index of
152.
NOTE: When temperatures remain below 20° F (-7 degrees C), JLG
Industries recommends the use of Mobil DTE 13M.
Aside from JLG recommendations, it is not advisable to mix oils of
different brands or types, as they may not contain the same
required additives or be of comparable viscosities. If use of
hydraulic oil other than Mobilfluid 424 is desired, contact JLG
Industries for proper recommendations.
– JLG Lift –
Table 6-8. Hydraulic Oil
SAE VISCOSITY GRADE
10W-20, 10W-30
20W-20
10W
6-5