JLG 600A Operation And Safety Manual page 52

0300177361,b300001393
Table of Contents

Advertisement

SECTION 3 - MACHINE CONTROLS AND INDICATORS
6. Tower Telescope
This switch provides extending and
retracting of the tower boom. This
function works only when the tower
boom is fully elevated (lift up).
TO AVOID UPSET AND SERIOUS INJURY, DO NOT OPERATE MACHINE IF TOWER LIFT
AND TELESCOPE FUNCTIONS DO NOT OPERATE IN THE ABOVE SEQUENCE.
7. Hourmeter
Registers the amount of time the
machine has been in use, with engine
running. By connecting into the oil
pressure circuit of the engine, only engine run hours are
recorded. The hourmeter registers up to 9,999.9 hours and
cannot be reset.
3-8
NOTE:
When the Platform/Ground Select Switch is in the
center position, power is shut off to the controls at
both operating stations. Remove the key to pre-
vent the controls from being actuated. The key is
removable in the platform position on CE specifi-
cation machines. The key must be available to
ground personnel in the event of an emergency.
8. Platform/Ground Select Switch
The three position, key operated switch sup-
plies power to the platform control console
when positioned to Platform. With the switch
key turned to the Ground position only
ground controls are operable.
– JLG Lift –
3121615

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

600aj

Table of Contents