Propane Fuel Filter Replacement; Removal - JLG 600A Operation And Safety Manual

6.6

PROPANE FUEL FILTER REPLACEMENT

Removal

1. Relieve the propane fuel system pressure. Refer to Propane
Fuel System Pressure Relief.
2. Disconnect the negative battery cable.
3. Slowly loosen the Filter housing and remove it.
4. Pull the filter housing from the Electric lock off assembly.
5. Remove the filter from the housing.
6. Locate Filter magnet and remove it.
7. Remove and discard the housing seal.
3121615
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
– JLG Lift –
1. Electric Lock Off Solenoid 6. Fuel Outlet
2. Housing Seal 7. O-ring
3. Filter Magnet 8. Filter
4. Filter Housing 9. Fuel Inlet
5. Electrical Connector 10. Ring
Figure 6-10. Filter Lock Assembly
6-31