Rear Panel - Billion BiPAC 5210G RC User Manual

Rear Panel

5210G RC
5200G RC / 5200G RD
1 Power Switch
2 Power adapter
3 Reset
4 Ethernet
USB (Only for
5
5210G RC)
6 DSL (Line)
7 Antenna
Power ON / OFF switch.
Connect with the supplied power adapter.
When the device power is on, press to reset or to restore its factory
default setting.
Press 1-3 seconds to reset the device.
Press 6 seconds and above to restore the device factory default
setting.
Connect to a home / office network device (eg. PC) of 100Mbps
or 10Mbps with the supplied UTP Ethernet cable (CAT-5).
User can connect to PC using an alternative USB cable through
this port.
Connect to a telephone network / ADSL using the provided RJ-11
cable.
Connect the antenna to this port.
9
Meaning