Billion BiPAC 5210G RC User Manual page 45

Setting this attribute to be larger than the maximum MSDU (MAC service data unit) size turns off the
RTS/CTS handshake. Setting this attribute to zero turns on the RTS/CTS handshake Enter a value
between 1500 and 2347.
Fragmentation Threshold: The threshold (number of bytes) for the fragmentation boundary for
directed messages. It is the maximum data fragment size that can be sent. Enter a value between
256 and 2346.
DTIM: This value, between 1 and 255, indicates the interval of the Delivery Traffic Indication Message
(DTIM).
802.11b/g: The default setting is 802.11b+g (Mixed mode). If you do not know or have both 11g and
11b devices in your network, then keep the default in mixed mode. From the drop-down manual,
you can select 802.11g if you have only 11g card. If you have only 11b card, then select 802.11b.
Multiple SSIDs Setting
SSID Index: Default SSID index is "1".
Broadcast SSID: Select Yes to make the SSID visible so a station can obtain the SSID through
passive scanning. Select No to hide the SSID in so a station cannot obtain the SSID through passive
scanning.
SSID: The SSID is the unique name of a wireless access point (AP) to be distinguished from another.
For security propose, change the default wlan-ap to a unique ID name to the AP which is already
built-in to the router's wireless interface. It is case sensitive and must not excess 32 characters.
Make sure your wireless clients have exactly the SSID as the device, in order to get connected to
your network.
Authentication Type: To prevent unauthorized wireless stations from accessing data transmitted
over the network, the router offers highly secure data encryption, known as WEP & WPA. If you
require high security for transmissions, there are four alternatives to select from: 64-bit WEP, 128-bit
WEP, WPA-PSK and WPA2-PSK. WEP 128 will offer increased security over WEP 64.
You can disable or enable WPA or WEP for protecting wireless network. The default type of wireless
is disabled and to allow all wireless computers to communicate with the access points without any
data encryption.
42