Quick Start Guide Billion Dual-Port ADSL2+ Modem/Router Model BiPAC 5210S Package Content 1. BiPAC 5210S 2. Power Adapter 3. RJ-11 /Telephone cable 4. Ethernet (CAT-5 LAN) cable 5. USB cable 6. CD USB Driver, On-line manual 7. Quick Start Guide Thai and English 8.
Page 16
5 ADSL Lit when successfully connected to an ADSL DSLAM 6 PPP Lit steady when there is a PPPoA / PPPoE connection. Rear Panel Port Meaning ON/OFF Power ON/OFF switch AC12V Connect the supplied power adapter AC12V to this jack. After the device is powered on, press it to reset the Device or restore to factory default settings.
Connecting Your ADSL2+ Modem/Router Installing through Ethernet (LAN) Port 1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network and Power on the device. 2. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.
Page 18
2. Click at Properties 3. Select Internet Protocol (TCP/IP) then click Properties. (18)
4. The window will show Internet Protocol (TCP/IP) Properties, Select General and click at Obtain an IP address automatically, click obtain DNS server address automatically then click OK. Installing the USB Driver on a PC If you connect the device through USB instead of Ethernet port do the following, for the first time the USB cable is connected to the PC 1.
Page 20
5. To choose the setup language click Next (There are three languages that user can choose: English, German and French) 6. To Click the type of setup you prefer, then click Next. (20)
Page 21
7. Windows will appear Setup Type, then select Typical and click Next. 8. To ensure enough information for the program files then click Next. 9. Please plug USB cable into ADSL USB modem, then click Yes. (21)
Page 22
10. Windows will appear Welcome to the Found New Hardware Wizard, then wait for software installation the software after that windows will be closed automatically. 11. Then, click Finish. (22)
12. Please check at Device Manager, It will appear ADSL Company ADSL USB Modem which signify that the driver USB installation is completed.(My Computer> right click> Manage> Device Manager) Setting Modem/Router by WEB Configuration 1. Open Internet Explore(IE) then type click Enter.
Page 24
3. You can see menu for configuration, click Interface Setup menu then fill Username and Password for connecting to Internet. Do not change other parameter value, then click Save (24)
Page 25
Connected and you can see IP address from Internet Service Provider. If you have any questions about the installation process, please contact Astra Communication Service Co., Ltd. Tel : 0-2617-3983 Fax : 0-2617-3986 Technical Support : 0-2279-7100 www.astra.in.th or www.billion.com (25)
Need help?
Do you have a question about the BiPAC 5210S and is the answer not in the manual?
Questions and answers