Wireless - Billion BiPAC 5210G RC User Manual

Wireless

This section introduces the wireless LAN and some basic configurations. Wireless LANs can be as
simple as two computers with wireless LAN cards communicating in a peer-to-peer network or as
complex as a number of computers with wireless LAN cards communicating through access points
which bridge network traffic to the wired LAN.
Access Point Setting
Access Point: Default setting is set to Activated. If you do not have any wireless, both 802.11g and
802.11b, device in your network, select Deactived.
Channel ID: The range of radio frequencies used by IEEE 802.11b/g wireless devices is called a
channel. Select a channel from the drop-down list box.
Transmit Power: User can customize the transmit power to either high, medium or low.
Beacon interval: The Beacon Interval value indicates the frequency interval of the beacon. Enter
a value between 20 and 1000. A beacon is a packet broadcast by the Router to synchronize the
wireless network.
RTS/CTS Threshold: The RTS (Request To Send) threshold (number of bytes) for enabling RTS/
CTS handshake. Data with its frame size larger than this value will perform the RTS/CTS handshake.
41