Rear Panel Connectors - Billion BiPAC 6300VNP User Manual

Rear Panel Connectors

1
PORT
1 Antenna
2 Phone (1X-2X)
3 USB
Gigabit
4
LAN Ethernet
5 Gigabit EWAN
6 Reset
WPS &
7
Wireless On/Off
8 Power
9 Power Switch
* Note: 1. For WPS configuration, please refer to the WPS section in the User Manual.
BiPAC 6300VNP User Manual
3
2
Screw the supplied Wi-Fi antennas onto the antenna connectors on both sides.
Connect your analog phone to this port with a RJ-11 cable.
Connect an external USB dongle / hard drive for storage, network sharing, etc
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN ports when
connecting to a PC or an office/home network of 10Mbps /100Mbps /1000Mbps
Connect to Fiber/ Cable/ xDSL Modem with a RJ-45 cable
After the device is powered on, press it 6 seconds or above: to restore to factory
default settings (this is used when you cannot login to the router, e.g. forgot your
password)
By controlling the pressing time, users can achieve two different effects:
*1
(1) WPS : Press &hold the button for less than 6 seconds to trigger WPS function.
(2) Wireless ON/OFF button: Press & hold the button for more than 6 seconds to
On/Off the wireless.
Connect the supplied Power Adapter to this port.
Power ON/OFF switch
4 5 6
7
MEANING
Introduction
8
1
9
7