Billion BiPAC 5210G RC User Manual page 50

Add Route
To add a new route, press the Add Route button. Then fill in all the parameters needed for the route.
When done, press the Save button.
Destination IP Address: This is the destination subnet IP address.
IP Subnet Mask: A subnet mask allows IP networks to be subdivided for security and performance
purposes.
Gateway IP Address: This is the gateway IP address to which packets are to be forwarded.
Metric: It represents the cost of transmission for routing purposes. The number need not be precise,
but it must be between 1 and 15.
Announced in RIP: This parameter determines if the Prestige will include the route to the remote
node in its RIP broadcasts. Set "No", it is kept private and is not included in RIP broadcasts. Set
"Yes", the remote node will be propagated to other hosts through RIP broadcasts.
Press SAVE to apply your settings and the item you added will be listed in the Routing Table List.
47