Advanced Setup; Firewall - Billion BiPAC 5210G RC User Manual

Advanced Setup

Firewall

Your router includes a firewall for controlling Internet access from your LAN that helps to prevent
attacks from hackers. In addition to this, when using NAT (Network Address Translation) the router
acts as a "natural" Internet firewall, since all PCs on your LAN use private IP addresses that cannot
be directly accessed from the Internet.
Firewall: to automatically detect and block Denial of Service (DoS) attacks, such as Ping of Death,
SYN Flood, Port Scan and Land Attack.
Enabled: As set in default setting, it activates your firewall function.
Disabled: It disables the firewall function.
SPI: If you enabled SPI, all traffics initiated from WAN would be blocked, including DMZ, Virtual
Server, and ACL WAN side.
Enabled: As set in default setting, it activates your SPI function.
Disabled: It disables the SPI function.
Press SAVE to apply your settings.
45