Billion BiPAC 5200S RC Series Quick Start Manual

Adsl2+ modem/router
Hide thumbs Also See for BiPAC 5200S RC Series:

Advertisement

Quick Links

BiPAC 5200S RC Series
ADSL2+ Modem/Router
Quick Start Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BiPAC 5200S RC Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Billion BiPAC 5200S RC Series

  • Page 1 BiPAC 5200S RC Series ADSL2+ Modem/Router Quick Start Guide...
  • Page 3: Package Contents

    Billion BiPAC 5200S RC Series ADSL2+ Modem/Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE. IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE USER MANUAL ON THE CD-ROM.
  • Page 4: Hardware Overview

    Quick Start Guide Hardware Overview BiPAC 5210S RC The Front LEDs Lit red when power is Lit when the device Lit red when WAN fails is connected to the to get IP address. Lit ON. Lit green when PC and is working green when WAN gets the system is ready.
  • Page 5 Billion BiPAC 5200S RC Series ADSL2+ Modem/Router Hardware Overview BiPAC 5200S RC/RD The Front LEDs Lit red when power is Lit red when WAN fails to get ON. Lit green when the IP address. Lit green when system is ready..
  • Page 6: Hardware Connection

    Quick Start Guide Hardware Connection BiPAC 5210S RC BiPAC 5200S RC BiPAC 5200S RD...
  • Page 7: Hardware Installation

    Billion BiPAC 5200S RC Series ADSL2+ Modem/Router Hardware Installation 1. Power Connection Plug the supplied power adapter into the wall jack and the other side to the router. Please note that the plug type may differ according to country. 2. LAN Connection Connect the supplied RJ-45 Ethernet cable to one of the Ethernet ports, and the other side to the PC’s Ethernet interface.
  • Page 8: Setup Utility

    Quick Start Guide 5. Splitter/ Micro-filter Connection Splitter / Micro-filters are important for ADSL installation, they help ensure that high-frequency signals are directed to the ADSL modem, and low-frequency signals are directed to the telephone or other analog voice-channel device to prevent inter-modulation distortion and get good speeds and stable ADSL sync rate a) Splitter connection...
  • Page 9: Connecting To The Router

    Contact Billion WORLDWIDE: http://www.billion.com Billion Product Registration Billion is committed to before and after sales customer services. You will get the most out of your Billion's products after registration. Please register online at http://www.billion.com/register to receive valuable services and support from us.

This manual is also suitable for:

Bipac 5210s rcBipac 5200s rd

Table of Contents