Xtp System Configuration Program - Extron electronics XTP II CrossPoint 1600 Setup Manual

XTP System Configuration Program

Another way to operate the matrix switcher is via the Windows
based XTP System Configuration software. For details on installing
and operating the program, see the XTP System Configuration
Software Help file.
NOTES:
•
•
1. Start the web browser program.
2. Click tin the
3. Enter the Matrix IP address in the
NOTE:
4. Press the keyboard <
whether it is password-protected.
If the matrix switcher is not password-protected, it checks
and downloads the HTML start-up page. The matrix switcher is
ready for operation via HTML remote control.
If the matrix switcher is password-protected, it downloads
the Windows Security dialog box (see figure 11).
Figure 11.
NOTE:
46 XTP II CrossPoint Series • Remote Control
If your Ethernet connection to the matrix switcher is
unstable, try turning off the proxy server in your web browser.
In Microsoft Internet Explorer, click
Options > Connections > LAN Settings
a proxy server...
For details on operating the matrix switcher via HTML pages,
see the "HTML Operation" section in the XTP II CrossPoint
Series User Guide.
Address
192.168.254.254 is the factory-specified default
value for this field.
Windows Security Dialog Box
A User name entry is not required.
Tools > Internet
box, and then click
field.
Address
> key. The matrix switcher checks
Enter
-
®
, uncheck the U
se
.
OK
field.