3.2.1 Fixed Hdds Sas/Sata Cable Guide; Table 10. Fixed Hdd Configuration Sata Cable Guide - Intel S2600CW Spares/Accessories List And Configuration Manual

Server board/chassis

Hide thumbs Also See for S2600CW:

Technical product specification (210 pages)

Table Of Contents

Table of Contents

Cable Kit Product Code Example - AXXCBL950HDMS

AXXCBL – Identifies an accessory cable kit

950 – identifies the length of the cable in millimeters

HD – identifies that one end of cable connector has SFF-8643 connector

MS – identifies that the other end of cable connector has SFF-8087 connector

7[S|R|P] – identifies that the other end of cable connector has single port SATA

Drive numbering in the system illustrations is for general reference only. Actual drive numbering will be dependant on SAS / SATA controller configuration and

how they are cabled to the backplane. Each installed backplane will include a multi-port data connector for each for drive group.

Each table in the following sections identifies the cable connections and recommended cable lengths for each supported storage controller option in the

specified system. Each "recommended" cable length for a given connector pair provides enough cable to attach the two devices with the least amount of

excess cable, resulting in the cleanest cable routing. See Table 19. Storage Data Cable Kit Description and Order Information for appropriate cable kits to use on

your system.

3.2.1 Fixed HDDs SAS/SATA Cable Guide

One Mini-SAS cable - iPC AXXCBL450HD7S is included in the server chassis while the other cables must be ordered separately, as needed.

One addtional set of HDD trays - iPC FUP4X35NHDK is needed for a fixed 8x3.5" or fixed 8x2.5" hard drive configuration since the Intel® Server Chassis is

shipped with only 4 HDD trays.

Drive

Cables for On-Board SATA Capable

Support

Controller to Hard Drive

Cable Connections:

SATA -> HDD

450mm HD --- 7S

Fixed

(1) AXXCBL450HD7S

4x3.5"

Cable included with the server chassis