Xstatus Audio Input Localinput [N] Mixermode; Xstatus Audio Input Localinput [N] Mute; Xstatus Audio Input Localinput [N] Name; Xstatus Audio Input Remoteinput [N] Callid - Cisco TelePresence MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xStatus Audio Input LocalInput [n] MixerMode

Shows how the local input connectors have been mixed together. You can run the command
xStatus Audio Input LocalInput to find the identity [n] of the input.
Auto: The microphone with the strongest speaker is active and the others are strongly
attenuated.
Fixed: The input connector signals are mixed together with equal gains.
GainShared: The microphones are given a normalized gain factor relative to the strongest
speaker before being mixed together.
Value space of the result returned:
Auto/Fixed/GainShared
Example:
xStatus Audio Input LocalInput 1 MixerMode
*s Audio Input LocalInput 1 MixerMode: "Auto"
** end

xStatus Audio Input LocalInput [n] Mute

Shows the mute mode for the local inputs. A local input is a mix of input connectors.
You can run the command xStatus Audio Input LocalInput to find the identity [n] of the input.
Value space of the result returned:
On/Off
Example:
xStatus Audio Input LocalInput 1 Mute
*s Audio Input LocalInput 1 Mute: "Off"
** end

xStatus Audio Input LocalInput [n] Name

Shows the name of the local input. A local input is a mix of input connectors. You can run the
command xStatus Audio Input LocalInput to find the identity [n] of the input.
Value space of the result returned:
String
Example:
xStatus Audio Input LocalInput 1 Name
*s Audio Input LocalInput 1 Name: "Microphone"
** end
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
D15335.02
About the API xConfiguration xCommand

xStatus Audio Input RemoteInput [n] CallId

Shows the CallId for the remote audio input.
You can run the command xStatus Audio Input RemoteInput to find the identity [n] of the input.
Value space of the result returned:
0..65534
Example:
xStatus Audio Input RemoteInput 8 CallId
*s Audio Input RemoteInput 8 CallId: 28
** end

xStatus Audio Microphones Mute

Shows whether the microphones are muted.
Value space of the result returned:
On/Off
Example:
xStatus Audio Microphones Mute
*s Audio Microphones Mute: Off
** end

xStatus Audio Output LocalOutput [n] Channels

States if the local output channels are mixed into into a mono signal (1) or stereo signal (2).
You can run the command xStatus Audio Output LocalOutput to find the identity [n] of the
output.
Value space of the result returned:
1..2
Example:
xStatus Audio Output LocalOutput 4 Channels
*s Audio Output LocalOutput 4 Channels: "1"
** end
136
API Reference Guide
xStatus xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.