Xcommand Camera Preset Edit; Xcommand Camera Preset List; Xcommand Camera Preset Remove - Cisco TelePresence MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xCommand Camera Preset Edit

Edit a stored camera preset. You can change the name of the camera preset and its position in
the list that is returned by the xCommand Camera Preset List command. You can also change
whether or not this preset is the default position for the associated camera.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras and the Video Input switcher settings.
Requires user role: USER
USAGE:
xCommand Camera Preset Edit PresetId:
[Name: "Name"] [DefaultProsition: DefaultProsition]
where
PresetId: Integer (1..35)
The ID of the camera preset you want to edit.
ListPosition: Integer (1..35)
The position in the list returned by the xCommand Camera Preset List command.
Name: String (0, 255)
The name of the camera preset. It will be used in the list returned by the xCommand
Camera Preset List command.
DefaultProsition: False/True
Defines whether or not this preset is the default position for the associated camera.
Note that each camera can only have one default position, so if set, the old default
preset will automatically be marked as not default.
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
D15335.02
About the API xConfiguration
[ListPosition: ListPosition]
PresetId
xCommand xCommand

xCommand Camera Preset List

List information about available camera presets.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras plus the Video Input switcher settings.
Requires user role: USER
USAGE:
xCommand Camera Preset List CameraId:
DefaultPosition]
where
CameraId: Integer (1..7)
Only list presets for the specified camera.
DefaultPosition: False/True
List default positions only, or only those that are not default positions.

xCommand Camera Preset Remove

Remove a camera preset.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras plus the Video Input switcher settings.
Requires user role: USER
USAGE:
xCommand Camera Preset Remove PresetId:
where
PresetId: Integer (1..35)
The ID of the camera preset you want to remove.
101
API Reference Guide
xStatus Appendices
CameraId [DefaultPosition:
PresetId
Copyright © 2016 Cisco Systems, Inc. All rights reserved.