Cisco TelePresence MX700 and MX800
Introduction
xCommand UserManagement RemoteSupportUser GetState
Retrieves the state of the generated remote support user, if one exists.
Requires user role: ADMIN
USAGE:
xCommand UserManagement RemoteSupportUser GetState
xCommand UserManagement User Passphrase Change
Change the passphrase for the user you logged in as. If you are logged in as the administrator,
this will change the administrator passphrase.
Requires user role: USER
USAGE:
xCommand UserManagement User Passphrase Change NewPassphrase: "NewPassphrase"
OldPassphrase: "OldPassphrase"
where
NewPassphrase: String (0, 255)
OldPassphrase: String (0, 255)
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
D15335.02
About the API
xConfiguration
xCommand
xCommand
xCommand UserManagement User Passphrase Set
Set a user passphrase for the specified user. You must be logged in as an administrator to set a
user passphrase.
Requires user role: ADMIN
USAGE:
xCommand UserManagement User Passphrase Set NewPassphrase: "NewPassphrase"
Username: "Username" YourPassphrase: "YourPassphrase"
where
NewPassphrase: String (0, 255)
Username: String (0, 127)
YourPassphrase: String (0, 255)
125
API Reference Guide
xStatus
Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.