Xstatus Video Presentation Pipposition; Xstatus Video Selfview Fullscreenmode; Xstatus Video Selfview Mode; Xstatus Video Selfview Onmonitorrole - Cisco TelePresence MX700 Reference Manual

Cisco TelePresence MX700 and MX800

Introduction

xStatus Video Presentation PIPPosition

Shows the position of the presentation image on the screen.
Value space of the result returned:
UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight
Example:
xStatus Video Presentation PIPPosition
*s Video PIP Presentation Position: CenterLeft
** end

xStatus Video Selfview FullscreenMode

Shows whether selfview is set on full screen mode or not.
Value space of the result returned:
On/Off
Example:
xStatus Video Selfview FullscreenMode
*s Video Selfview FullscreenMode: Off
** end

xStatus Video Selfview Mode

Shows whether selfview mode is set on or not.
Value space of the result returned:
On/Off
Example:
xStatus Video Selfview Mode
*s Video Selfview Mode: Off
** end
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
D15335.02
About the API xConfiguration xCommand

xStatus Video Selfview OnMonitorRole

Identifies which monitor(s) contains the selfview, if present.
Value space of the result returned:
First/Second/Third/Fourth
Example:
xStatus Video Selfview OnMonitorRole
*s Video Selfview OnMonitorRole: First
** end

xStatus Video Selfview PIPPosition

Shows the position of the selfview image on the screen.
Value space of the result returned:
UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight
Example:
xStatus Video Selfview PIPPosition
*s Video Selfview PIPPosition: LowerRight
** end
175
API Reference Guide
xStatus xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.