Installation
2.1
Si-Ware Installation
The Si-Ware software must be installed on your PC and your PC must be connected to your
flowmeter.
Please perform the following steps to install your Siemens Si-Ware software:
1. Create a suitable folder ("Si-Ware" or desired name) on your PC hard drive.
2. Insert the Si-Ware CD into the appropriate drive.
3. Run the Install program.
4. If desired, create a short cut and icon for the appropriate .exe file and place it on the
5. Double-click on the .exe icon to launch the Si-Ware program.
Si-Ware Quick Start
Programming Manual, 10/2011, A5E02951525-03
Note
Si-Ware .exe program files for the following languages:
English - dv.exe
French - dvfrench.exe
German - dvgerman.exe
Spanish - dvspan.exe
desktop.
2
7