Siemens SITRANS F Programming Manual page 19

Alarm/Warnings Storage Setup Screen
Setup Status
This screen section indicates when a command has been executed successfully.
Storage Memory
This screen section:
● Enables Alarms/Warnings Storage function.
● Allows user to input a request for flowmeter memory allocation to use for data storage.
● Displays the amount of flowmeter memory requested, memory actually allocated and the
● Allows user to clear requested memory and to free memory space of previously stored
Status Information
This screen section indicates if Pass/Fail Limits parameters are set up properly.
● Limits Setup Properly - indicates if the Pass/Fail Limits are set up properly
● Limits Match Site - indicates that the Pass/Fail Limits match the type of flowmeter (i.e.
● Site Enabled - indicates if the flowmeter site is enabled.
● Storage Active - indicates if the Enabled Alarms/Warning Storage function is active.
Si-Ware Quick Start
Programming Manual, 10/2011, A5E02951525-03
percentage of flowmeter memory space used.
data.
Transit-Time or Reflexor).
Menu Screens
4.1 Setup Menu
17